![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://beehaw.org/pictrs/image/847a7f32-d140-4db8-9fd1-ea26da513063.png)
Smoke is mostly particulates, I think, and most of it will absolutely stick to the jacket and spare the clothing below.
Smoke is mostly particulates, I think, and most of it will absolutely stick to the jacket and spare the clothing below.
Enforcing DRM has a big downside: it paints a massive target on the DRM implementation, and it will likely end up getting broken.
Honestly for commercial use $20 is a steal even if it just includes the model license and compute is extra.
border-radius?
Steam is full of anime porn games.
For a long time there wasn’t even a way to filter them meaningfully, as porn and gore were in the same category. So you either had the default filter and couldn’t see some of the most violent games, or you turned the filter off and every listing turned into 90% porn games. I think they realized that and now have separate categories for “adult because gory” and “tits”.
It absolutely is a thing. Network effect matters. Usability matters. Open source/community solutions usually lack that (and the lack of familiarity makes it worse).
I'm not worried about fully cured CA glue on a non-contact surface of a shelf that holds bottles/milk packs etc., or honestly even fruit whose peel you don't eat.
Given that CA-based glues are used for wound closure and apparently even as dental adhesives, I'll trust https://www.ontariopoisoncentre.ca/household-hazards-items/super-glue/ over the many sites that look like ChatGPT wrote them (mostly trying to sell some food safe alternative). It's not food safe, so I wouldn't glue e.g. a soup bowl with it, but eating an orange that sat on a cured seam in a fridge isn't going to poison you.
This will work, in theory, and if you're willing to use a lot of water. It's probably a bad idea.
Heating one kilogram of water by one degree Celsius without phase transitions (freezing/melting, evaporating/condensing) takes 1 kilocalorie of energy. That's roughly 4 kilojoules aka kilowattseconds, or 0.0012 kWh.
Thus, to get 1.2 kW of cooling, which is about half of what those tiny portable air conditioners promise, at a 10 degree temperature difference, you'd need 100 liters of water per hour. If water costs $0.40 per 100 liters, and electricity cost $0.40 per kWh, an air conditioner (using about 0.4 kW of electricity to pump 1.2 kW of heat) will be a lot cheaper, and that's ignoring the power you might need to run the pumps and fan on your solution (all of which you get back as heat!)
Unless the water in the loop is below the dew point, you also won't get any dehumidification. This is actually more important than cooling, and a big reason why air conditioned rooms feel so much better (sitting in the shade in 40° C dry weather would be unpleasant but fine, at 100% humidity, it would be reliably fatal regardless of fitness).
If you're building new, look into:
In the end, you're building a new building, so you now have a chance to do everything right using modern but already proven technology. I wouldn't DIY anything critical and hard to change like this. Remember, you're trying to find the best (likely: cheapest in the long term while meeting your reliability requirements) solution that will solve your problem. There's a very high chance that's simply "add more A/C and solar according to what's locally available". And that's fine. There's nothing bad about that.
I wouldn't, for example, try to build with different materials than locally common, even if those were "better" by some metric. That often doesn't give you a better house, that gives you a unique house, and unique can be a nightmare.
Absolutely not worth trying to fix a plug like that (instead of replacing the plug with a new plug) IMO. Where would you even start? You'd essentially be trying to make a new plug from scrap and at best creating something inaccurate that'd be unreliable and likely wear or outright damage anything it's plugged into.
What glue did you use?
I made a similar repair but with a smaller break using superglue (cyanoacrylate), held perfectly. However, I reinforced the broken part with a piece of a plastic card glued to the side. Consider doing that if this doesn't hold.
I'd be concerned that the rough surface you seem to have now will be hard to clean and may get very nasty. Other than that, if it works it works.
Can we not have clickbait titles on the Fediverse?
Generally people aren't maxing out their download bandwidths, so if you have peers and are below your upload limit, the bottleneck is either your computer (e.g. disk, CPU), your network (e.g. WiFi, Internet), or the peering between your ISP and theirs (e.g. Deutsche Telekom).
The baked in garbage is a result of you using shitty sources, possibly because there are few good sources available and thus you find more of the shitty ones.
Usually while the movie is not released digitally, only low quality copies are available. Many sites/groups don't bother with those because few people want to watch that.
I'd just wait for the release. You'll instantly find stuff that's not just clean, but also in a decent quality.
Without having read the whole thing, so I’m not sure how clear the article is about it: the important part is that donations to Mozilla go to the Mozilla Foundation, which does the political campaigning/social justice etc. stuff, while Firefox development happens in the Mozilla Corporation funded with search engine deals etc.
So again:
Don’t have vulnerable shit and ignore them.
Those are just weather.
I see two three pin 3.5mm stereo plugs (one of them color coded for the headphones and one for the mic), and zero 4-pin combo plugs?