Llamatron

He died as he lived, obstructing democracy

True meaning being what? Might is right? Greed is good? Racism is super cool? Ignorance is knowledge?

You don’t happen to know of a guide on how to set this up? All I’ve found so far has told me that ZFS isn’t meant to mirror over network.

Or do you mean how you can enable replication on a VM?

Mikrotik Hex S

Oh I have a pair of D-Link switches (again off ebay) that are stacked together. My router, NAS and both ProxMox hosts have LACP connections to both. And my home WiFi is a couple Aruba IAPs, one on each switch. So if I lose a switch then most things will keep running.

Thanks, I’ll look into it.

So my plan had been to set up a pair of ProxMox hosts, use Ceph to do the shared storage and use HA so VMs could magically move around if a host died. However, I discovered Ceph and HA need a minimum of 3 hosts. HA can be done if you set up a Pi or some other 3rd host that can act as the 3rd vote in the event of a failure but as I didn’t have Ceph I’ve not bothered trying.

I’ve read Ceph can work on 2 but not well or reliably.

I might setup a 3rd host some day but it seems a bit of a waste as I just don’t need that amount of resources for what I’m running.

And I should have known really, I’ve a bit of a background in VMware, albeit at the enterprise level so I’ve never had to even think about 2 or 3 node clusters.

Up until a couple of weeks I was running it on a dedicated Pi4. It’s now running as a VM in ProxMox on a pair of Lenovo M710q mini PCs I got off ebay for £40 each.

I did load them up with RAM, upgrade the CPUs and add a second NIC so they probably came in at more like the cost of a 16Gb Pi5. Each. The RAM was the pricey part. I’ve measured the power usage and they each use about a 3rd more power than the Pi did which I’m happy with. Given that, the added flexibility of running ProxMox and how quiet they are I’m super happy with the setup.

Oh and I used to run PiHole on another Pi. That’s gone now replaced with Technitium DNS running as a pair of VMs too. That was surprisingly easy to do.

Something I’ve never really understood about the Avatar movies, derivative plot, poor script and tedious length aside - is the CGI meant to look real? Are we meant to watch these and think this could have been filmed on a real alien planet?

I remember the fuss when the first one came along over how amazing the visuals were. And they are impressive but I’ve always thought of them as very pretty animated movies and at no point thought anything looked photorealistic.

Nothing will improve until the rich fear for their lives.

I’m using a raspberry pi with a ‘sonoff universal zigbee 3.0 USB dongle’. But I’ve no clue what I’m doing. I originally got into it just so I could automate a bedroom light for the wife. Beyond that I’ve got a couple of lights and contact sensors and the recent attempt at controlling a dehumidifier. Googling and blind luck has got me this far.

I wonder if it helps that the door contact sensor is in the same room as the zigbee dongle? Maybe 20ft away

I shall investigate. Thanks for the suggestion

Sadly I can’t find a UK Thirdreailty plug. Their website only shows US, doesn’t even detect I’m coming from the UK so I’d guess US only. Surprising seeing as the company is based in China.

Looks like there’s no DOGAIN UK plugs. Which is a shame. I have an INNR plug running a dehumidifier and it’s not great. It will turn off and on as per my Home assistant schedule and I get to see how much power is being used which is cool. However, it has a habit of turning itself off and back on randomly while as far as home assistant is concerned there’s been no interruption. It’s frustrating.

Aquara door sensors here too and they work great. I have one that turns on the kitchen light after sunset when the back door is opened and it works flawlessly.

Well shit. There’s a lot of Asus in my PC. Fingers crossed it doesn’t break.